|
Efficient
and simple small chipper for farm and forest work as well as home
and garden
The LAIMET PS-10 chipper operation is based on a cylindrical screw
blade, which works efficiently to produce splinter free even quality
chips. The rotating screw blade also functions as a feed unit so
that a separate feed is unnecessary.
The LAIMET PS-10 is a tractor driven small chipper of remarkably
simple construction There are few parts that wear It is reliable
in operation and needs little maintenance.
One size chips with many different
uses
The LAIMET PS-10 produces one
size chips, from 10 - 15 mm. The rate of production is from 2 to
6 m3/h depending on the blade used, wood to be used,
the type and size of wood. The even quality chips of the PS-10 are
particularly suitable for use as compost chips, fuel chips, animal
litter, and in mulching cultivated land.
Chips from all sorts of wood
The LAIMET PS-10 chipper can
chip all sorts of clean wood:
coniferous and deciduous, thinned out wood, tree tops, pruned and
unpruned saplings, sawn surfaces and also frozen wood. The PS-10
can chip up to 100 mm size wood and branches. Operational noise
is comparatively quiet, but it is a good idea to use ear protectors
because of motor noise.
Maintenance of the chipper
Sharpening of the screw blade
may be done without removing the blade using a separate sharpener
unit, which is standard equipment. Basic reconditioning of the blade
is done by re-welding the hard facing and then grinding it to the
correct angle. Welding and grinding may be done by a skilled metal
worker using the manufacturer's instructions. The blade may also
be sent to the manufacturer for reconditioning from whom ready to
use exchange blades are also available.
Make waste wood into money and protect nature
The LAIMET PS-1O is a sensible choice when otherwise worthless waste
is to be utilised or if the chips are to decompose in the environment.
The low service costs of the LAIMET PS-1O chipper give real savings.
|
|
