HP-35
Heavy chipper for contractors for all sorts of wood chipping work, diameters up to 230 mm.

Heavy chipper for professional use, chips for heating and pulp

The heart of the chipper is the conical screw blade.
The LAIMET HP-35 chipper functions like other LAIMET HP chippers using a conical screw blade, which efficiently produces splinter free even quality chips. The rotating screw blade also functions as a feed unit so that a separate feed is unnecessary. The eed conveyor and uppe feed roller (ava ab e as accessories) sign an y increase chipp ng productivity.
The LAIMET HP-35 is a diesel engine driven chipper of remarkably simple construction.
It has very few parts that wear. It is reliable in operation and little maintenance required. The heavy flywheel evens out the load on the motor. The drive motor, reduction gears and other components can be selected to satisfy the wishes of customers on a case by case basis.

Changeable blades for different size chips
The LAIMET HP-35 can produce five different sizes of chips; from 15 - 25 mm up to 60- 100 mm. The rate of production is from 80 to 140 m³/h, depending on the blade used, wood to be used, the type and size of wood.

Chips from all sorts of wood
The Laimet HP-35 chipper can chip all sorts of clean wood: coniferous and deciduous, thinned out wood, tree tops, pruned and unpruned saplings, blocks, sawn surfaces and also frozen wood. The HP-35 can chip up to 280 mm size wood and branches. Operational noise is comparatively quiet, but it is a good idea to use ear protectors because of noise from the motor.

Maintenance of the chipper
Sharpening of the screw blade may be done without removing the blade using a separate sharpener unit, which is standard equipment. Basic reconditioning of the blade is done by rewelding the hard facing and then grinding it to the correct angle. Removal of the blade is done using a crane. Welding and grinding may be done by a skilled metal worker using the manufacturer's instructions. The blade may also be sent to the manufacturer for reconditioning from whom ready to use exchange blades are available.

Make waste wood into money and protect nature
The LAIMET HP-35 is a sensible choice for the chipper contractor.
The even quality chips are suitable for use: in heating, as pulp chips, in covering cultivated land and fields, as compost, and animal litter. The low service costs of the LAIMET HP-35 chipper give real savings.